10550 GAC-2111 Rebuilt of vintage EMT-2111 cable with ultrastrong Polyuretane jacket

GAC-2111 (10550) balanced installation cable PUR

Rebuild of the legendary EMT-2111 audio cable with ultrastrong PUR-jacket. Balanced double shielded audio cable! Very flexible. Professional installation cable with small diameter, PE-insulation for low capacity. Ideal for fixed installations and rack-wirings, also ideal for outdoor use and installations where mechanical strength of the cable is needed. This vintage design was available from Germany based turntablemaker EMT and is still used for turntable interconnect leads with phono connectors.
LFOC higher grade copper at best standards for best performance.


 

Construction:

1 = Jacket: PUR, Ø 4.5 mm, grey (light)
2 = Viscose fiber coat: Counter wrapped to the shields
2 = Shield No. 1: Bare copper wires (0.10 mm) 100% coverage
3 = Shield No. 2: Bare copper wires (0.10 mm) 100% coverage
4 = Separation: PE-coat
5 = Insulation: PE, Ø 1.20 mm, conductors black and white wrapped
6 = Conductor: (2 Conductors!): Stranded bare copper wires 28 x 0.10 mm OFC Ø 0.60mm (0.22 mm²) 28x38AWG = 24 AWG
 

Technical Datas:

Conductor resistance:    < 85 ohm/km
Shielding resistance:    < 20 Ohm/km
Capacitance (at 800Hz): cond/cond:  < 62 nF/km
  cond/shield:  < 119 nF/km
Characteristic impedance: at 20 kHz: 145 Ohm
Test voltage: cond/cond:  500 veff
  cond/shield:  2000 veff
Operating voltage:   low voltage
Temperature range: flexi-installed: -5° to +50° C
  fix-installed: -30° to +70° C
 

Ordering Information:

Order No. Type Diameter Colour Spool Size Weight/
Spool
 Shipping Unit
10550 GAC-2111 4.5 mm gray 150m 4.30 kg 4x150m
 
.


Please inquire via contact and avoid entering all datas. You can also simply send us an email to info@gotham.ch
No minimum order!

Please see ordering Information link:
Terms: Prices are in CHF (Swiss Francs), this price is including Swiss Domestic 7.70%  VAT. Ex works Dietikon Switzerland. Packing and crate included. You can collect your order in Dietikon w/o any shipping fees.

Sold per meter and standard spools from Swiss warehouse.  *Price per meter only charged if not a full spool was ordered.

- Shipment from stock in Switzerland:  we can ship from Swiss sales office in Dietikon Switzerland. No minimum Order
Orders from Swiss warehouse can consolidate other products from our domestic range (such as connectors) and cables could be cut to order and/or even terminated with connectors.

Check possible remnant spools/leftover pieces at special prices from Swiss warehouse!
Link to Sale items


- shipment from warehouse in Germany:  stored in bonded warehouse c/o Streck Transport GmbH in Freiburg (Germany). Attention: German clients and EC clients w/o UID (Vat identification) number will be charged with 19% German VAT in addition! Minimum order for shipments from Germany warehouse is for each line item 1pc standard shipping unit or multibles thereof. Collections at warehouse possible by appintment only and with some restrictions.

**shipping unit/standard spool: The shipping units rules do only apply for orders being shipped from bonded warehouse in Germany. From our Swiss headquarters we can ship any quantity, per cut meter, full spool or shipping unit!


Full Pricelists (download) in Euro/US$ and CHF to be found here: Link


Please inquire via Contact and avoid entering all datas, you can simply send us an email to info@gotham.ch

 

Gotham Cables are available from our Swiss service lab soldered as per your desires.
Each cable is being made in our own service lab by our own staff at highest standards and to your specification.
Visit our soldering department here:  LINK 


       

Balanced XLR wiring instruction: 
Pin1= shields, Pin2= brown (Signal+),  Pin3= white (Signal -).
Should space not allow to solder all strands of the many shields, you can put only each a few strands of each layer of the shields to ground Pin 1. Cut away any spare strands from the shields and secure that no loose strands are hanging around. Use a shrinking tube to avoid short ciricuits. We do not recommend to put any ground to the body shell on either side of your XLR line. The connector shell will get to ground once plugged into a receptacle.
 
Having your shields put on the connectors shell is dangerous! Imagine, a loose cable can make contact with another loose cable connector having a different ground potential. So the metal connector is conductive and shall not carry your audio ground used on the shieldings of your audio signal. It can interfere with other "grounds" such as video, data of power grounds, which are potentially different! So keep "grounds" separate!


RCA/Phono/Jack unbalanced wiring using balanced wire:
Many clients use our balanced  2 conductor cable also for unbalanced interconnects. In this case we recommend to only use 1 conductor (brown) for your signal and put all other wires or parts thereof to ground with the shields. This will increase your noise protection! However for unbalanced application we do have our perfect unbalanced wires 1001x, and 1000x.
Unbalanced Stereo & 2 Channels (loop) application:
We actually do not support the idea to use a 2 conductor cable for stereo unbalanced wiring, however it will be done and can be made with acceptable compromise regarding crosstalk and similar. Again all the shields to ground but not to the body shell of your XLR connector. Check our perfect stereo cables 12001/13001 or our conductor shielded Starquad 11301 for real quality stereo wiring!

 
QR-Code