Guitar cables TBA

 

(Swiss Made) à la Carte in house at Gotham Audio



Guitar cables (1/4" Jack mono)
GAC-1 Ultra (1001-x)
"No Noise"
Guitar cables(1/4" Jack mono)
GAC-1 (1000-x)
double Reussen shieded, "Low Noise"
Guitar cables  (1/4" Jack mono)
DGS-1 (6000-x)
Single shielded, "Low Noise"
     
     



please ask for a quotation here: (link)  Enter your order with a simple email to info@gotham.ch

Please indicate your address and details, indicate product and quantity and requested delivery date.  
We also provide an orderform (Doc) you can complete and email or fax to us.


+/- 1m You can adjust the desired cable length!
Prices indicated are always per piece with a 3 meter length. If you need a pair, please order 2pc. We assemble each cable manually in our own lab in Dietikon. Allow a few days delivery delay. Some stock available for immediate shipment. We can only invoice full meters but you can ask your cable per cm specified. Therefore 1.50 meter would be charged like 2.00 meter. We will confirm/quote correct price/delivery after receipt of your inquiry/order. All cables are made individually and indicated dimensions and lenght are estimated and possible tolerances of +/- 3% are possible.
Shipped from Switzerland:  Cable assemblies we can only ship from Swiss sales office in Dietikon Switzerland.

Starquad wiring instruction:
In order to benefit from the Starquad concept you need to wire the 4 conductors for you balanced audio cable as follows: (See wiring diagram below)
Bundle each opposite (Star) conductor together, we made colour code easy to identify the opposite conductor. (red/pink and white/ivory each belong together.)
Pin2= red&pink (Signal+),  Pin3= white&ivory (Signal -). Pin1= shield 1&2 =Ground
Put each a few strands of each layer of the shields together to ground Pin 1 should you not have space for all shielding strands.
Cut away any spare strands from the shields and secure that no loose strands are hanging around. Use a shrinking tube to avoid short circuits.
We do not recommend putting any ground to the body shell on either side of your XLR line. The connector shell will get to ground once plugged into a receptacle.
RCA/Phono/Jack unbalanced wiring:
Many clients use our 4 conductor cable also for unbalanced interconnects. In this case we recommend to only use 2 conductor (red&pink) for your signal and put all other wires or parts thereof to ground with the shields. This will increase your noise protection! However for unbalanced application we do have our perfect unbalanced wires 1001x, and 1000x.
Stereo & 2 Channels application:
We actually do not support the idea to use a Starquad cable for stereo wiring, however it will be done and can be made with acceptable compromise regarding crosstalk and similar. If you use the cable as stereo line, use red/white for channel 1 and pink/ivory for channel 2. And again, all the shields to ground but not to the body shell of your connector.
Check our perfect stereo cables 12001/13001 or our conductor shielded Starquad 11301 for real quality stereo wiring!
 



Please inquire via Contact and avoid entering all datas, you can simply send us an email to info@gotham.ch
and we will  quote with our ERP system. Link Contact
or use our orderform  to ask for a confirmation/estimate

 
QR-Code