Starquad Microphone Cable assemblies XLR 11001
Hi-End Starquad XLR Mikrophonecable (balanced)
Construction:
Wire: GAC-4/1 11001 Starquad with double reussenshield. also as FRNC available (11201)
new also available with ultrastrong PUR cable 11051 GAC-4/1 Road 4 Conductor - Starquad Cables: Gotham "Star-Quad" cables are the most advanced microphone cables presently available. We have combined an ultraflexible PVC-jacket, low capacitive PE insulation, "double Reussen shielding" and quad (4-conductor) construction for a truly professional cable at an affordable price. The "Star-Quad" concept is known and recommended where the RF-rejection is the most important factor and where very long cable runs are needed. As we use each 2 conductors for low and high signal, we reduce the signal loss by 50% and due to the offset of the incoming RF-signal by the way the 4 conductors are twisted, the RF-rejection is over 130dB (25 kHz). The exclusive double shielding does its part of these features as well.Diese Stecker werden seit 40 Jahren so gebaut und sind die stabilsten im Markt.
Connector: 
GCXLRFemale1BK/male1BK (Pro-Serie with gold Contacts)
other connectors on request
| Starquad 11001 (11201 FRNC) |
Road Starquad with PUR Jacket 11051 |
|
|---|---|---|
 |
 |
 XLR Gold Series |
Retail Prices / Ordering Information (July 2022):
| Order Nr. | Cable type | color | Connector | Length | Price each | +/- 1m | ||
|---|---|---|---|---|---|---|---|---|
| CHF | EUR | CHF | EUR | |||||
| KO11051GCXLR03 | GAC-4/1 Road (PUR) | 11051 black | GC-XLRFemale1BK/Male1BK | 3.0m | 70.10 | 62.00 | 5.10 | 4.50 |
| KO11001GCXLR03 | GAC-4/1 | 11001 black | GC-XLRFemale1BK/Male1BK | 3.0m | 65.75 | 58.15 | 3.75 | 3.3 |
Please inquire via contact and avoid entering all datas. You can also simply send us an email to info@gotham.chNo minimum order!
Terms: CHF Prices (Swiss Francs), are including Swiss Domestic 8.10% VAT.
US$/Euro Prices are for Export and do not include any VAT.
Ex works 8953 Dietikon Switzerland. Packing and crate included. You can collect your order in Dietikon w/o any shipping fees.
Sold per meter and standard spools from Swiss warehouse. *Price per meter only charged if not a full spool was ordered.
All measures per meters are estimated only. Effective values may vary a few % as we manually measure and rewind.
-
Shipment from stock in Switzerland: we can ship from Swiss sales office in Dietikon Switzerland. No minimum orderOrders from Swiss warehouse can consolidate other products from our domestic range (such as connectors) and cables could be cut to order and/or even terminated with connectors.
Starquad wiring instruction:
In order to benefit from the Starquad concept you need to wire the 4 conductors for you balanced audio cable as follows: (See wiring diagram below)
Bundle each opposite (Star) conductor together, we made colour code easy to identify the opposite conductor. (red/pink and white/ivory each belong together.)
Pin2= red&pink (Signal+), Pin3= white&ivory (Signal -). Pin1= shield 1&2 =Ground
Put each a few strands of each layer of the shields together to ground Pin 1 should you not have space for all shielding strands.
Cut away any spare strands from the shields and secure that no loose strands are hanging around. Use a shrinking tube to avoid short circuits.
We do not recommend putting any ground to the body shell on either side of your XLR line. The connector shell will get to ground once plugged into a receptacle.
RCA/Phono/Jack unbalanced wiring:
Many clients use our 4 conductor cable also for unbalanced interconnects. In this case we recommend to only use 2 conductor (red&pink) for your signal and put all other wires or parts thereof to ground with the shields. This will increase your noise protection! However for unbalanced application we do have our perfect unbalanced wires 1001x, and 1000x.
Stereo & 2 Channels application:
We actually do not support the idea to use a Starquad cable for stereo wiring, however it will be done and can be made with acceptable compromise regarding crosstalk and similar. If you use the cable as stereo line, use red/white for channel 1 and pink/ivory for channel 2. And again, all the shields to ground but not to the body shell of your connector.
Check our perfect stereo cables 12001/13001 or our conductor shielded Starquad 11301 for real quality stereo wiring!
