Ultra Pro XLR Cable 10561
Hi-End 2 core conductor shielded XLR Mikrophone cable (balanced)
Construction:
Wire: GAC-2 UltraPro 10651 each conductor shielded cable Hi-End Microphone Cable. Available also in purple colour 10666
Balanced 5 times shielded audio cable! Ultraflexible professional audio cable for microphones. 'Double Reussen shield', velvet matte non-light reflecting PVC-jacket material.
A unique construction invented by Gotham Audio design.
Each conductor is shielded with a lap shield 100% covering copper wires (7) (Reussen shield) plus a conductive separation layer (6) (Aluminium coated polyester). This conductor is twisted around conductor no 2 and turn is hold in place with another aluminium coated layer, followed by Gotham's unique double Reussen shield. This cable is absolutely uncompromised to achieve maximum shielding possible while the flexibility and durability is still very good and the cable can be used in mobile applications as well.
The cable is built with a stabile 110 ohm impedance and can be used for analog balanced audio signals as well as digital audio signals in the AES-EBU format. Ideal cable for accomodation of XLR-connectors with corresponding 8mm diameter cable claps.
Available as designated AES-EBU cable with purple color (10666), same construction but with purple color.
Connector: 
Gotham Connector GCXLRFemale1BK/male1BK (Pro-Serie with gold Contacts)
As an additional option you could source the desired special connectors (any brand) and send them to us and we would assemble these connectors to our wires for a fee. But in our experience our Gotham connector are serving all needs for a very good interconnect at top standards. XLR we usually colour-code with small piece of coloured shrinking tube on the wire rather than these colour-code rings used on NT which easy break and fall off.
| 10561/10666 conductor shielded and double Reussen shielded |
 |
|
|---|---|---|
.png) |
 |
|
Retail Prices / Ordering Information (July 2022):
| Order Nr. | Cable type | Connector | Length | Price each | +/- 1m | |||
|---|---|---|---|---|---|---|---|---|
| CHF | EUR | CHF | EUR | |||||
| KO10561GCXLR03 | GAC-2 Ultra Pro | 10561/10666 | GC-XLRFemale1BK/Male1BK | 3.0m | 115.50 | 102.15 | 12.55 | 11.10 |
+/- 1m We can adjust the desired cable length!
Prices indicated are always per piece with a 3 meter length. If you need a pair, please order 2pc. We assemble each cable manually in our own lab in Dietikon. Allow a few days delivery delay. Some stock available for immediate shipment. We can only invoice full meters but you can ask your cable per cm specified. Therefore 1.50 meter would be charged like 2.00 meter. We will confirm/quote correct price/delivery after receipt of your inquiry/order. All cables are made individually and indicated dimensions and lenght are estimated and possible tolerances of +/- 3% are possible.
Shipped from Switzerland: Cable assemblies we can only ship from Swiss sales office in Dietikon Switzerland.
Please inquire via contact and avoid entering all datas. You can also simply send us an email to info@gotham.chNo minimum order!
Starquad wiring instruction:
In order to benefit from the Starquad concept you need to wire the 4 conductors for you balanced audio cable as follows: (See wiring diagram below)
Bundle each opposite (Star) conductor together, we made colour code easy to identify the opposite conductor. (red/pink and white/ivory each belong together.)
Pin2= red&pink (Signal+), Pin3= white&ivory (Signal -). Pin1= shield 1&2 =Ground
Put each a few strands of each layer of the shields together to ground Pin 1 should you not have space for all shielding strands.
Cut away any spare strands from the shields and secure that no loose strands are hanging around. Use a shrinking tube to avoid short circuits.
We do not recommend putting any ground to the body shell on either side of your XLR line. The connector shell will get to ground once plugged into a receptacle.
RCA/Phono/Jack unbalanced wiring:
Many clients use our 4 conductor cable also for unbalanced interconnects. In this case we recommend to only use 2 conductor (red&pink) for your signal and put all other wires or parts thereof to ground with the shields. This will increase your noise protection! However for unbalanced application we do have our perfect unbalanced wires 1001x, and 1000x.
Stereo & 2 Channels application:
We actually do not support the idea to use a Starquad cable for stereo wiring, however it will be done and can be made with acceptable compromise regarding crosstalk and similar. If you use the cable as stereo line, use red/white for channel 1 and pink/ivory for channel 2. And again, all the shields to ground but not to the body shell of your connector.
Check our perfect stereo cables 12001/13001 or our conductor shielded Starquad 11301 for real quality stereo wiring!
Please inquire via Contact and avoid entering all datas, you can simply send us an email to info@gotham.ch
