Tube Microphone cables Wirig instruction.
However there is only one catch with regards to the wiring diagram.Our tube cable has 5 conductors with 0.14mm² (for signal +/- ) 1 or 2 channels and 2 larger conductors 0.5mm² they usual are used to bring power to the Tube and we need to know which pins on the Microphone carry the power to solder the correct site conductor to the correct pin.
Plus a double shield. Also usually the 2 shields need to be soldered to one of the conductors as we do not think it is wise to put the shield to the XLR connectors body shell (metal)
So you need to instruct us which pin would get the larger diameter. Potentially you have a wiring diagram/Service manual, schematic diagram of your mic and preamplifier.
in the manual or you ask your dealer...
You must indicate desired wiring diagram and confirm.
Tube microphones are in the field with many diffrent pin configurations and you must specify desired pin configuration found most likely in the owners manual of your tube microphone! We assemble every cable individually and in our own servicelab but can not investigate correct pin layout for your microphone! Ask your microphone manufacturer for pinconfiguration of this 7 pin XLR. There is no rule and no norm for this.
The 20101 is a standard universal cable designed for tube microphones of many kind. Out of the 7 conductors, 2 are made with larger diameter (copper) meant to serve the tube with power, and the other 5 smaller conductors are meant to work as signal and/or control lines. Possibly not all conductors are needed. Any unneeded conductor should go to ground together with our Double Reussen shield.
| GC-XLR 7 Male1BK Gold Plated XLR 7 Pin Male Connector. Gold plated contacts Black surface. full metal body fits cables up to 9.0mm Ø |
SFr. 12.60 |  |
| GC-XLR 7 Female1BK Gold Plated XLR 7 Pin Female Connector. Gold plated contacts Black surface. full metal boddy fits cables up to 9.0mm Ø |
SFr. 12.60 |  |
Retail Prices / Ordering Information:
| Order Nr. | Cable type | color | Connector | Length | Price each | +/- 1m | ||
|---|---|---|---|---|---|---|---|---|
| CHF | EUR | CHF | EUR | |||||
KO20101GC703xx KO20101GC705xx Ko20101GC710xx |
gray |
XLR 7 Pin XLR male-female |
3.0m 5.0m 10.0m |
114.45 125.20 175.30 |
105.00 115.00 162.00 |
4.65 4.65 4.65 |
4.30 4.30 4.30 |
|
You must indicate desired wiring diagram and confirm. Tube microphones are in the field with many diffrent pin configurations and you must specify desired pin configuration found most likely in the owners manual of your tube microphone! We assemble every cable individually and in our own servicelab but can not investigate correct pin layout for your microphone!
Ask your microphone manufacturer for pinconfiguration of this 7 pin XLR. There is no rule and no norm for this.
