New Starquad Cable 11281

14.09.2021 12:31:15 | Franz Ammann

new 11281 GAC-4/1v2.  6.3mm Ø Starquad 4-conductor microphone cable


Gotham "Star-Quad" cables are the most advanced microphone cables presently available. We have combined an ultraflexible PVC-jacket, low capacitive PE insulation, " Reussen shielding" and quad (4-conductor) construction for a truly professional cable at an affordable price. The "Star-Quad" concept is known and recommended where the RF-rejection is the most important factor and where very long cable runs are needed. As we use each 2 conductors for low and high signal, we reduce the signal loss by 50% and due to the offset of the incoming RF-signal by the way the 4 conductors are twisted, the RF-rejection is over 130dB (25 kHz). The exclusive double shielding does its part of these features as well. OFC copper at best standards for best performance.
This latest version 11281 has an increased outside diameter (6.3mm) and reduced shielding to considerable lower the price.
An affortable starquad cable with still upscale performance and superiour quality to many of our competitors.

Available from stock. No minimum order!

See all starquad cables  here: Link
 

  

Construction:
1 =-Jacket: PVC,  Ø 6.30 mm, velvet black  1,30mm
2 = Shield No. 1 Bare copper wires (0.10 mm) 100% coverage
3 = Shield No. 2
Conductive Viscose fiber coat:		 K6160 Polyester nonwoven thermally bonded,
both sides copper coated. Counter wrapped to the quad twisted conductors
4= Twisting 4 core  twisted together, star-quad
5 = Insulation (cond): PE -2YI1 , Ø 1.2 mm, 0.30mm , red, white, ivory, pink, star quad arrangement
6 = Conductor: Stranded bare copper wires 7x0.20mm  LCOF  Ø 0.60mm (0.22 mm²) 7x32AWG = (24AWG)
   

Technical Datas:
Conductor resistance:   < 85.0 ohm/km
Shielding resistance:   < 14.0 Ohm/km
Capacitance: cond/cond: < 42  nF/km
  cond/shield: < 120 nF/km
Side circuit capacitance: single conductor 42 pF/m
Side circuit capacitance: Quad system 120 pF/m
Noise attenuation:   130 dB (see wiring)
Characteristic impedance: at 20 kHz: 180 Ohm
Test voltage: cond/cond: 1200 veff
  cond/shield: 1200 veff
Operating voltage   low voltage 100v max
Temperature range: flexi-installed: -5° to +50° C
  fix-installed: -30° to +70° C

Starquad wiring instruction 11288 starquad:
In order to benefit from the Starquad concept you need to wire the 4 conductors for you balanced audio cable as follows: (See wiring diagram below)
Bundle each opposite (Star) conductor together,
Pin2= red&ivory (Signal+),  Pin3= pink&white (Signal -). Pin1= shield 1&2 =Ground
Put each a few strands of each layer of the shields together to ground Pin 1 should you not have space for all shielding strands.
Cut away any spare strands from the shields and secure that no loose strands are hanging around. Use a shrinking tube to avoid short circuits.
We do not recommend putting any ground to the body shell on either side of your XLR line. The connector shell will get to ground once plugged into a receptacle.
    

Ordering Information:

Order No. Type Type Colour Spool Size Weight/
Spool		  Shipping Unit
11001 GAC-4/1 Starquad PVC 5.4 mm black 100m 4.70 kg 4x100m
11051 GAC-4/1 Road Starquad PUR 7.0 mm black 200m 15.00 kg 2x200m
11201 GAC-4/1 Starquad FRNC 5.4 mm black 100m 4.70 kg 4x100m
11281 GAC-4/1 V2 Starquad PVC 6.3 mm black 100m 5.00 kg 4x100m
11288 GAC-4/1 V1 Starquad FRNC 4.7 mm white 100m 4.00 kg 4x100m

Retail Prices May 2021:

Order
Nr.		 Analog Cables Length/
Spool		 Color **shipping unit CHF (Swiss Francs) Export EUR
per spool *per meter per spool *per meter
11001 GAC-4/1 Starquad PVC 100 m black  4x100m 303.05 3.75 268.00  3.35
11051 GAC-4/1 Road Starquad PUR 200m black 2x200m 851.85  5.10 753.30  4.50
11201 GAC-4/1 Starquad FRNC 100 m black  4x100m 303.05  3.75 268.00  3.35
11281 GAC-4/1 V2 Starquad PVC 100m black 4x100m 225.45  2.70 199.40  2.40
11288 GAC-4/1 V1 Starquad FRNC 100m white 4x100m 273.85  3.40 242.15  3.00
.

 
QR-Code