11051 Road Starquad cable with PUR Jacket

GAC-4/1 (11051) Road Starquad balanced audio cable,
New Product available in October 2016
Starquad cable similar to our 11001 but enforced with another jacket layer with ultrastrong PUR Material.  Additional shielding together with our double reussen shield  with the useage of our conductive fiber coating known and used on our Hi-End wire 11301 and 10561.
Gotham "Star-Quad" cables are the most advanced microphone cables presently available. We have combined an ultraflexible PVC-jacket, low capacitive PE insulation, "double Reussen shielding" and quad (4-conductor) construction for a truly professional cable at an affordable price. The "Star-Quad" concept is known and recommended where the RF-rejection is the most important factor and where very long cable runs are needed. As we use each 2 conductors for low and high signal, we reduce the signal loss by 50% and due to the offset of the incoming RF-signal by the way the 4 conductors are twisted, the RF-rejection is over 130dB (25 kHz). The exclusive double shielding does its part of these features as well.
OFC copper at best standards for best performance.

  

Construction:

1 = PUR -Jacket: PUR, Ø 7.0 mm, velvet black  0.70mm
2 = PVC-Jacket PVC, Ø 5.6 mm, white (ultrasoft) 0.80mm
3 = Shield No. 1 Bare copper wires (0.10 mm) 100% coverage
4 = Shield No. 2 Bare copper wires (0.10 mm) 100% coverage
5 = Conductive Viscose fiber coat: PETPAL Polyester nonwoven thermally bonded,
both sides aluminium coated. Counter wrapped to the quad twisted conductors
6 = Twisting 4 core and cotton yarns twisted together, star-quad
7 = Insulation (cond): PP -9Y , Ø 1.4 mm, white, ivory, pink and red,
8 = Conductor: Stranded bare copper wires 28x0,10mm  OFC  Ø 0.60mm (0.28 mm²)

Technical Datas:

Conductor resistance:   < 85.0 ohm/km
Shielding resistance:   < 14.0 Ohm/km
Capacitance: cond/cond: < 55  nF/km
  cond/shield: < 130 nF/km
Side circuit capacitance: single conductor 55 pF/m
Side circuit capacitance: Quad system 130 pF/m
Noise attenuation:   130 dB (see wiring)
Characteristic impedance: at 20 kHz: 180 Ohm
Test voltage: cond/cond: 500 veff
  cond/shield: 500 veff
Operating voltage   low voltage 100v max
Temperature range: flexi-installed: -5° to +50° C
  fix-installed: -30° to +70° C

Ordering Information:

Order No. Type Type Colour Spool Size Weight/
Spool
 Shipping Unit
11001 GAC-4/1 Starquad PVC 5.4 mm black 100m 4.70 kg 4x100m
11051 GAC-4/1 Road Starquad PUR 7.0 mm black 200m 15.00 kg 2x200m
11201 GAC-4/1 Starquad FRNC 5.4 mm black 100m 4.70 kg 4x100m

Retail Prices:

Order
Nr.
Analog Cables Length/
Spool
Color **Export shipping unit CHF (Swiss Francs) Export EUR
per spool *per meter per spool *per meter
11001 GAC-4/1 Starquad PVC 100 m black  4x100m 268.90  3.35 237.15  2.95
11051 GAC-4/1 Road Starquad PUR 200m black 2x200m 756.00  4.55 666.65  4.00
11201 GAC-4/1 Starquad FRNC 100 m black  4x100m 268.90  3.35 237.15  2.95
.

 
please ask for a quotation here: (link)    

Please indicate your address and details, indicate product and quantity and requested delivery date.  


Please see ordering Information link:
Terms: Prices are in CHF (Swiss Francs), this price is including Swiss Domestic 7.70%  VAT. Ex works Dietikon Switzerland. Packing and crate included. You can collect your order in Dietikon w/o any shipping fees.

Sold per meter and standard spools from Swiss warehouse.  *Price per meter only charged if not a full spool was ordered.

- Shipment from stock in Switzerland:  we can ship from Swiss sales office in Dietikon Switzerland. No minimum Order
Orders from Swiss warehouse can consolidate other products from our domestic range (such as connectors) and cables could be cut to order and/or even terminated with connectors.

Check possible remant spools/leftover pieces at special prices from Swiss warehouse!
Link to Sale items


- shipment from warehouse in Germany:  stored in bonded warehouse c/o Streck Transport GmbH in Freiburg (Germany). Attention: German clients and EC clients w/o UID (Vat identification) number will be charged with 19% German VAT in addition! Minimum order for shipments from Germany warehouse is for each line item 1pc standard shipping unit or multibles thereof. Collections at warehouse possible by appintment only and with some restrictions.

**Export shipping unit:
The shipping units rules do only apply for orders being shipped from bonded warehouse in Germany. From our Swiss headquarters we can ship any quantify, per cut meter, full spool or shipping unit!


Full Pricelists (download) in Euro/US$ and CHF  to be found here:Link


Gotham Cables are available from our Swiss servicelab soldered as per your desires. Each cable is being made in our own servicelab by our own staff at higest standards and to your specification.
Visit our soldering department here:  LINK

Starquad wiring instruction:
In order to benefit from the Starquad concept you need to wire the 4 conductors for you balanced audio cable as follows: (See wiring diagram below)
Bundle each opposite (Star) conductor together, we made colour code easy to identify the opposite conductor. (red/pink and white/ivory each belong together.)
Pin2= red&pink (Signal+),  Pin3= white&ivory (Signal -). Pin1= shield 1&2 =Ground
Put each a few strands of each layer of the shields together to ground Pin 1 should you not have space for all shielding strands.
Cut away any spare strands from the shields and secure that no loose strands are hanging around. Use a shrinking tube to avoid short circuits.
We do not recommend putting any ground to the body shell on either side of your XLR line. The connector shell will get to ground once plugged into a receptacle.
RCA/Phono/Jack unbalanced wiring:
Many clients use our 4 conductor cable also for unbalanced interconnects. In this case we recommend to only use 1 conductor (red) for your signal and put all other wires or parts thereof to ground with the shields. This will increase your noise protection! However for unbalanced application we do have our perfect unbalanced wires 1001x, and 1000x.
Stereo & 2 Channels application:
We actually do not support the idea to use a Starquad cable for stereo wiring, however it will be done and can be made with acceptable compromise regarding crosstalk and similar. If you use the cable as stereo line, use red/white for channel 1 and pink/ivory for channel 2. And again, all the shields to ground but not to the body shell of your connector.
Check our perfect stereo cables 12001/13001 or our conductor shielded Starquad 11301 for real quality stereo wiring!
 


Video "do it yourself" Konfektion Starquad auf XLR Stecker

-XLR Starquad mit 11001 auf QGP Stecker




 
QR-Code