Hybrid Starquad Double Shielded & 3 x 1.50mm² (11615) Double Shielded Power Cable
Hybrid Audio/Power cable perfect to make interconnect leads for active loudspeaker systems/studio monitors.We combine a double shielded starquad cable similar to our 41001 with a double shielded power cable 85015 for 230VAC.
Our starquad construction will protect your genuine audio signal from possible RF-interferences transmitted from your mains power line.
| Signal A: similar to DGS 4/1mini, Starquad but enhanced shielding | ||
 |
||
Construction: Star quad Audio Cable side |
||
| 1 = Jacket: | PVC, Ø 6.0 mm, black | |
| 2 = Shield No. 1: | Bare copper wires (0.10mm) 100% coverage | |
| 3 = Shield No. 2: | K6160 Polyester nonwoven thermally bonded, both sides copper coated (see below) | |
| 4 = Insulation: | PE, Ø 1.2 mm, white, red, pink and ivory quad twisted | |
| 5 = Conductor: | Stranded bare copper wires 7 x 0.20mm (0.22mm²) | |
Technical Datas: |
||
| Conductor resistance: | < 85 ohm/km | |
| Shielding resistance: | < 20 Ohm/km | |
| Capacitance: | cond/cond: | < 42 nF/km |
| cond/shield: | <120 nF/km | |
| Characteristic impedance: | at 20 kHz: | 80 ohm |
| Rated Voltage | Operating Voltage | max. 100 Veff |
| Test Voltage | 1200 Veff | |
| Side B: 3 x 1.50mm² Double Shielded (85015) Power Cable | ||
 |
||
Construction: 3 x 1.50mm² Double Shielded (85015) Power Cable Side |
||
| 1 = Jacket: | PVC, Ø 7.6 mm, black | |
| 2 = Shield 1: | Bare copper wires (0.10mm), 100% coverage | |
| 3 = Shield 2: | K6160 Polyester nonwoven thermally bonded, both sides copper coated (see below) | |
| 4 = Drain Wire | 16x0,19mmØ OFC | |
| 5 = Insulation: | PE - 2YI1 , Ø 2.40mm high voltage tested, Blue – Brown – Yellow/Green | |
| 6 = Conductor: | 27x0,25mmØ "OFC" Cu 1,50mm² bare copper stranded IEC 60228 Class 5 flexible copper conductor 1,50mm² |
|
Technical Datas: |
||
| Conductor resistance: | < 13.3 ohm/km | |
| Shielding resistance: | < 25 ohm/km | |
| Rating voltage: | @ current 9.0 Ampere/Line/ 950 Watt | 250 V |
| Test Voltage: | 2000 veff | |
| Maximum Watts load: | @ current 4.00 Ampere/Line | < 500 Watt |
Ordering Information:
|
Order No.
|
Type
|
Diameter
|
Colour
|
Spool Size
|
Weight/
Spool |
Shipping
Unit |
| 11615 | Hybrid Cable | 7.6 x 13.4 mm | black | 100m (H327) | 16.50 kg | 2x100m |
New additional shield with K6160 Polyester nonwoven thermally bonded, both sides copper coated
K6160 Polyester nonwoven thermally bonded, both sides copper coated
Please inquire via contact and avoid entering all datas. You can also simply send us an email to info@gotham.chNo minimum order!
Please see ordering Information link:
Terms: Prices are in CHF (Swiss Francs), this price is including Swiss Domestic 7.70% VAT. Ex works Dietikon Switzerland. Packing and crate included. You can collect your order in Dietikon w/o any shipping fees.
Sold per meter and standard spools from Swiss warehouse. *Price per meter only charged if not a full spool was ordered.
-
Shipment from stock in Switzerland: we can ship from Swiss sales office in Dietikon Switzerland. No minimum OrderOrders from Swiss warehouse can consolidate other products from our domestic range (such as connectors) and cables could be cut to order and/or even terminated with connectors.
Check possible remnant spools/leftover pieces at special prices from Swiss warehouse!
Link to Sale items 
-
shipment from warehouse in Germany: stored in bonded warehouse c/o Streck Transport GmbH in Freiburg (Germany). Attention: German clients and EC clients w/o UID (Vat identification) number will be charged with 19% German VAT in addition! Minimum order for shipments from Germany warehouse is for each line item 1pc standard shipping unit or multibles thereof. Collections at warehouse possible by appintment only and with some restrictions.
**shipping unit/standard spool: The shipping units rules do only apply for orders being shipped from bonded warehouse in Germany. From our Swiss headquarters we can ship any quantity, per cut meter, full spool or shipping unit!
Full Pricelists (download) in Euro/US$ and CHF to be found here: Link
Please inquire via Contact and avoid entering all datas, you can simply send us an email to info@gotham.ch
Gotham Cables are available from our Swiss service lab soldered as per your desires.
Each cable is being made in our own service lab by our own staff at highest standards and to your specification.
Visit our soldering department here: LINK
Starquad wiring instruction:
In order to benefit from the Starquad concept you need to wire the 4 conductors for you balanced audio cable as follows: (See wiring diagram below)
Bundle each opposite (Star) conductor together, we made colour code easy to identify the opposite conductor. (red/pink and white/ivory each belong together.)
Pin2= red&pink (Signal+), Pin3= white&ivory (Signal -). Pin1= shield 1&2 =Ground
Put each a few strands of each layer of the shields together to ground Pin 1 should you not have space for all shielding strands.
Cut away any spare strands from the shields and secure that no loose strands are hanging around. Use a shrinking tube to avoid short circuits.
We do not recommend putting any ground to the body shell on either side of your XLR line. The connector shell will get to ground once plugged into a receptacle.
RCA/Phono/Jack unbalanced wiring:
Many clients use our 4 conductor cable also for unbalanced interconnects. In this case we recommend to only use 2 conductor (red&pink) for your signal and put all other wires or parts thereof to ground with the shields. This will increase your noise protection! However for unbalanced application we do have our perfect unbalanced wires 1001x, and 1000x.
Stereo & 2 Channels application:
We actually do not support the idea to use a Starquad cable for stereo wiring, however it will be done and can be made with acceptable compromise regarding crosstalk and similar. If you use the cable as stereo line, use red/white for channel 1 and pink/ivory for channel 2. And again, all the shields to ground but not to the body shell of your connector.
Check our perfect stereo cables 12001/13001 or our conductor shielded Starquad 11301 for real quality stereo wiring!
