"Neumann" XLR Microphone leads

 

(Swiss Made) à la Carte in house at Gotham Audio

10701/10801 GAC-3  (Neumann)
Doubleshielded with Gotham Connectors XLR
 

New also in Version 5.8mm Diameter in black color.  (10801)


Please inquire via contact and avoid entering all datas. You can also simply send us an email to info@gotham.ch
No minimum order!

+/- 1m  We can adjust the desired cable length!
Prices indicated are always per piece with a 3 meter length. If you need a pair, please order 2pc. We assemble each cable manually in our own lab in Dietikon. Allow a few days delivery delay. Some stock available for immediate shipment. We can only invoice full meters but you can ask your cable per cm specified. Therefore 1.50 meter would be charged like 2.00 meter. We will confirm/quote correct price/delivery after receipt of your inquiry/order. All cables are made individually and indicated dimensions and lenght are estimated and possible tolerances of +/- 3% are possible.
Shipped from Switzerland:  Cable assemblies we can only ship from Swiss sales office in Dietikon Switzerland.

How to wire 3-Conductor cables to XLR connectors:
3 Conductor cables 10701/10801  will best be wired/soldered as follows:

Each conductor to each Pin:  Pin1= green plus shields, Pin2= brown (Signal+),  Pin3= white (Signal -). Put each a few strands of each layer of the shields together with the green conductor to the ground Pin 1.
Cut away any spare strands from the shields and secure that no loose strands are hanging around. Use a shrinking tube to avoid short circuits. We do not recommend to put any ground to the body shell on either side of your XLR line. The connector shell will get to ground once plugged into a receptacle. The round construction of a 3 conductor cable will give many more moving cycles to your interconnect cable as the perfect round cable will distribute/allow any movement in any direction of the cables bending point at the connectors strain relief. This will give an extremely better (longer) lifespan of your cable.


RCA/Phono/Jack unbalanced wiring: Many clients use our 3 conductor perfect round cable also for unbalanced interconnects. In this case we recommend to only use 1 conductor (brown) for you signal and put all other wires or parts thereof to ground with the shields. This will increase your noise protection! However for unbalanced application we do have our perfect unbalanced wires 1001x, and 1000x.

Please inquire via Contact and avoid entering all datas, you can simply send us an email to info@gotham.ch

QR-Code