RCA / Phono / Chinch / Jack cable assemblies
Velcro Tapes with Gotham Logo for cable assembliesOnly available from Swiss Sales office.
All Swiss made cable assemblies will be equipped with this feature at no additional costs
(Swiss Made) à la Carte in house at Gotham Audio
|"ultimative" RCA Hi-End
GAC-1 Ultra (1001-x)
| RCA Hi-End Cable using
our Starquad wires
|Phono / Chinch / RCA
analog GAC-1 (1000-x)
|Guitarcable (1/4" Jack mono)
GAC-1 Ultra (1001-x)
line (12010) Amphenol
also for Video VGA 75 Ohm
using Gotham Connectors
|12010 to RCA
|12010 Stereo to 3.5mm Jack|
+/- 1m You can adjust the desired cable length!
Prices indicated are always per piece with a 3 meter length. If you need a pair, please order 2pc. We assemble each cable manually in our own lab in Dietikon. Allow a few days delivery delay. Some stock available for immediate shipment. We can only invoice full meters but you can ask your cable per cm specified. Therefore 1.50 meter would be charged like 2.00 meter. We will confirm/quote correct price/delivery after receipt of your inquiry/order. All cables are made individually and indicated dimensions and lenght are
estimated and possible tolerances of +/- 3% are possible. All cables are per piece, if you like a pair you need to order 2pc please.
No minimum Order. We are not part of EC, carefully check possible import fees and local VAT. Euro Prices are w/o VAT.
simple order per email here: 7.70 % Swiss VAT included in CHF Sales Price!
No VAT included in Euro prices. Ex works Dietikon Switzerland. Packing and crate included.
You can collect your order here w/o any shipping fees by appointment.
Balanced XLR wiring instruction:
Pin1= shields, Pin2= brown (Signal+), Pin3= white (Signal -).
Should space not allow to solder all strands of the many shields, you can put only each a few strands of each layer of the shields to ground Pin 1. Cut away any spare strands from the shields and secure that no loose strands are hanging around. Use a shrinking tube to avoid short ciricuits. We do not recommend to put any ground to the body shell on either side of your XLR line. The connector shell will get to ground once plugged into a receptacle.
Having your shields put on the connectors shell is dangerous! Imagine, a loose cable can make contact with another loose cable connector having a different ground potential. So the metal connector is conductive and shall not carry your audio ground used on the shieldings of your audio signal. It can interfere with other "grounds" such as video, data of power grounds, which are potentially different! So keep "grounds" separate!
RCA/Phono/Jack unbalanced wiring:
Many clients use our 2 conductor cable also for unbalanced interconnects. In this case we recommend to only use 1 conductor (brown) for your signal and put all other wires or parts thereof to ground with the shields. This will increase your noise protection! However for unbalanced application we do have our perfect unbalanced wires 1001x, and 1000x.
Unbalanced Stereo & 2 Channels (loop) application:
We actually do not support the idea to use a 2 conductor cable for stereo unbalanced wiring, however it will be done and can be made with acceptable compromise regarding crosstalk and similar. Again all the shields to ground but not to the body shell of your connector. Check our perfect stereo cables 12001/13001 or our conductor shielded Starquad 11301 for real quality stereo wiring!