XLR AES-EBU Digital lead 110 Ohm 10601

Construction:

Cable: GAC-2 AES 10601  Digital 110 Ohm Balanced double shielded digital & analoge audio cable.  Auch kompakt 10620

Digital Audio signals in the AES/EBU format require an interconnect cable with the correct construction. A mismatch of the impedance, a too small conductor diameter (skin-effect) or an impedance change in a cable run will cause digital errors (jitter) which are causing costly problems on your digital recording. We have found the stability of the impedance the most critical point on an AES/EBU cable and our solution is the "Star-Quad" twisting of the two conductors with two PE-strands to hold the conductors always in place, even when the cable is being bent. Together with our unique "double Reussen shield" we have the perfect signal cable for AES/EBU Digital Audio without compromises in regard to flexibility and handling. The GAC-2 AES is a low loss, flexible AES/EBU cable optimized for use with XLR-connectors or installations with long cable runs (>100m).

Connector: 
GCXLRFemale1BK/male1BK (Pro-Serie with gold Contacts) XL strain releif -12mm.
alternative :  Switchcraft - Consistently Excellent Since 1946  Switchcraft  QGP or A3FBAU/A3MBAU (Pro-Serie with Gold contacts) or A3F/A3M with silver contacts

other connectors on request

 
10601 GAC-2 AES
Impedanzstablisiert
110-Ohm Digital Audio
Switchcraft - Consistently Excellent Since 1946

XLR Gold Series

 

Retail Prices / Ordering Information (July 2022):

Order Nr. Cable type   Connector Length Price each +/- 1m
CHF  EUR CHF  EUR
KO10601GCXLR03 GAC-2 AES 10601
Purple
GC-XLRFemale1BK/Male1BK Gold 3.0m 54.60 48.30 2.95 2.60
KO10601AXBA03 GAC-2 AES 10601
Purple
A3FBAU-A3MBAU gold Contacts 3.0m 65.90 58.25 2.95 2.60
KO10601AXB03 GAC-2 AES 10601
Purple
A3FB-A3MB Silver Contacts 3.0m 50.70 44.85 2.95 2.60
KO10601QGP03

GAC-2 AES

10601
Purple

  QGP322/323

3.0m 97.45 86.15 2.95 2.60
 

+/- 1m  We can adjust the desired cable length!
Prices indicated are always per piece with a 3 meter length. If you need a pair, please order 2pc. We assemble each cable manually in our own lab in Dietikon. Allow a few days delivery delay. Some stock available for immediate shipment. We can only invoice full meters but you can ask your cable per cm specified. Therefore 1.50 meter would be charged like 2.00 meter. We will confirm/quote correct price/delivery after receipt of your inquiry/order. All cables are made individually and indicated dimensions and lenght are estimated and possible tolerances of +/- 3% are possible.
Shipped from Switzerland:  Cable assemblies we can only ship from Swiss sales office in Dietikon Switzerland.

Please inquire via contact and avoid entering all datas. You can also simply send us an email to info@gotham.ch
No minimum order!

Please inquire via Contact and avoid entering all datas, you can simply send us an email to info@gotham.ch

Starquad wiring instruction:
In order to benefit from the Starquad concept you need to wire the 4 conductors for you balanced audio cable as follows: (See wiring diagram below)
Bundle each opposite (Star) conductor together, we made colour code easy to identify the opposite conductor. (red/pink and white/ivory each belong together.)
Pin2= red&pink (Signal+),  Pin3= white&ivory (Signal -). Pin1= shield 1&2 =Ground
Put each a few strands of each layer of the shields together to ground Pin 1 should you not have space for all shielding strands.
Cut away any spare strands from the shields and secure that no loose strands are hanging around. Use a shrinking tube to avoid short circuits.
We do not recommend putting any ground to the body shell on either side of your XLR line. The connector shell will get to ground once plugged into a receptacle.
RCA/Phono/Jack unbalanced wiring:
Many clients use our 4 conductor cable also for unbalanced interconnects. In this case we recommend to only use 2 conductor (red&pink) for your signal and put all other wires or parts thereof to ground with the shields. This will increase your noise protection! However for unbalanced application we do have our perfect unbalanced wires 1001x, and 1000x.
Stereo & 2 Channels application:
We actually do not support the idea to use a Starquad cable for stereo wiring, however it will be done and can be made with acceptable compromise regarding crosstalk and similar. If you use the cable as stereo line, use red/white for channel 1 and pink/ivory for channel 2. And again, all the shields to ground but not to the body shell of your connector.
Check our perfect stereo cables 12001/13001 or our conductor shielded Starquad 11301 for real quality stereo wiring!
 







 
QR-Code